Cisco Cisco IOS Software Release 12.4(11)T
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2006–2007 Cisco Systems, Inc. All rights reserved.
BGP per Neighbor SoO Configuration
First Published: November 17, 2006
Last Updated: February 28, 2007
Last Updated: February 28, 2007
The BGP per Neighbor SoO Configuration feature simplifies the configuration of the site-of-origin
(SoO) value. In Cisco IOS Release 12.4(9)T, 12.2(33)SRA, and previous releases, the SoO value is
configured using an inbound route map that sets the SoO value during the update process. Per neighbor
SoO configuration introduces two new commands that can be used under router configuration mode to
set the SoO value.
(SoO) value. In Cisco IOS Release 12.4(9)T, 12.2(33)SRA, and previous releases, the SoO value is
configured using an inbound route map that sets the SoO value during the update process. Per neighbor
SoO configuration introduces two new commands that can be used under router configuration mode to
set the SoO value.
Finding Feature Information in This Module
Your Cisco IOS software release may not support all of the features documented in this module. To reach
links to specific feature documentation in this module and to see a list of the releases in which each feature is
supported, use the
links to specific feature documentation in this module and to see a list of the releases in which each feature is
supported, use the
.
Finding Support Information for Platforms and Cisco IOS and Catalyst OS Software Images
Use Cisco Feature Navigator to find information about platform support and Cisco IOS and Catalyst OS
software image support. To access Cisco Feature Navigator, go to
software image support. To access Cisco Feature Navigator, go to
. An
account on Cisco.com is not required.
Contents
•
•
•
•
•
•
•
•
•