Cisco Cisco IOS Software Release 12.4(6)T
1
NAT ARP Ping
The ARP Ping feature enables the NAT entry and the secure ARP entry to not be deleted when the static
IP client exists in the network where the IP address is unchanged after authentication.
IP client exists in the network where the IP address is unchanged after authentication.
Configuration Information
Configuration information is included in the “Configuring NAT for IP Address Conservation” module in
the
the
, Release 12.4T, at the following URL:
•
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcg/tnat_c/index.htm
Command Reference Information
Command reference information is included in the “
chapter of the
Cisco IOS IP
Addressing Services Command Reference
, Release 12.4T, at the following URL:
•
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/tiad_r/adrnatht.htm
New or Modified Commands
The following commands are modified for this feature:
•
ip nat pool
•
ip nat translation (timeout)
List of All Release 12.4T Commands
An alphabetical list of all Cisco IOS Release 12.4T commands is in the Cisco IOS Master Command List,
Release 12.4T, at the following URL:
Release 12.4T, at the following URL:
•
List of All New, Modified, Removed, and Replaced Release 12.4T Commands
Alphabetized lists of all new, modified, removed, and replaced commands for each Cisco IOS
Release 12.4T release are in the Cisco IOS New, Modified, Removed, and Replaced Commands,
Release 12.4T, document at the following URL:
Release 12.4T release are in the Cisco IOS New, Modified, Removed, and Replaced Commands,
Release 12.4T, document at the following URL:
•