Cisco Cisco IOS Software Release 12.4(9)T
1
FHRP - HSRP Group Shutdown
The FHRP - HSRP Group Shutdown feature enables you to configure a Hot Standby Router Protocol
(HSRP) group to become disabled (its state changed to Init) instead of having its priority decremented
when a tracked object goes down.
(HSRP) group to become disabled (its state changed to Init) instead of having its priority decremented
when a tracked object goes down.
Configuration Information
Configuration information is included in the “Configuring HSRP” module in the Cisco IOS IP
Application Services Configuration Guide, Release 12.4T,
Application Services Configuration Guide, Release 12.4T,
at the following URL:
The following sections provide information about this feature:
•
HSRP Group Shutdown
•
Configuring HSRP Object Tracking
•
HSRP Group Shutdown: Example
For a complete list of features included in the “Configuring HSRP” module, refer to the Feature
Information Table located toward the end of the module.
Information Table located toward the end of the module.
Command Reference Information
Command reference information is included in the Cisco IOS IP Application Services Command
Reference, Release 12.4T, at the following URL:
Reference, Release 12.4T, at the following URL:
New or Modified Commands
The following commands are modified for this feature:
•
show standby
•
standby track
List of All Release 12.4T Commands
An alphabetical list of all Cisco IOS Release 12.4T commands is in the Cisco IOS Master Commands
List, Release 12.4T, at the following URL:
List, Release 12.4T, at the following URL: