Cisco Cisco IOS Software Release 12.2(2)DD

Use the following commands to monitor and maintain VPDN group session limiting:

Router# show vpdn group name

Displays the session-limit set, and the number of 
active sessions and tunnels on the specified VPDN 
group.

name—VPDN group name summarizes the 
configuration of the specified group.

Router# show vpdn

Displays a summary of all active VPDN tunnels.

Router# show vpdn history failure

Displays information about VPDN user failures.

Router# show vpdn session [all [interface | tunnel | 

] | packets | sequence | state | timers | window] 

Displays VPDN session information including 
interface, tunnel, username, packets, status, and 
window statistics.

all—All session information for active 
sessions.

interface—Interface associated to a 
specific session.

tunnel—Tunnel attribute filter. 

username—Username filter.

 packets—Packet/byte count.

 sequence —Sequence numbers.

 state—State of each session.

 timers—Timer information.

 window—Window information.

Router# show vpdn tunnel [all [id | local-name | remote-name] 

| packets | state | summary | transport] 

Displays VPDN tunnel information including 
tunnel protocol, ID, local and remote tunnel 
names, packets sent and received, tunnel, and 
transport status.

all—All information for active tunnels. 
Options are:

id—Local tunnel ID.

local-name—Name of local end of 
tunnel.

remote-name—Name of remote end of 
tunnel.

 packets—Packet/byte count.

 state—Tunnel state information.

 summary—Tunnel information summary.

 transport—Tunnel transport information.