Cisco Cisco IOS Software Release 12.4(2)XB6 Technische Referenzen
-122
Cisco Broadband Wireless Gateway 1.2 Command Reference, IOS Release 12.4(15)XL3
OL-14681-01
Chapter Cisco Broadband Wireless Gateway 1.2 Command Reference, IOS Release 12.4(15)XL3
security subscriber address-filtering ingress
security subscriber address-filtering ingress
To enable the Ingress address filtering for the subscriber, use the security subscriber address-filtering
ingress command in user group configuration mode. Use the no form of the command to disable Ingress
address filtering.
ingress command in user group configuration mode. Use the no form of the command to disable Ingress
address filtering.
security subscriber address-filtering ingress
Syntax Description
There are no keywords or arguments.
Defaults
The feature is disabled.
Command Modes
User group configuration mode.
Command History
Usage Guidelines
When enabled in the upstream path, the source IP address in the packet is verified against the allowed
set of addresses that are allocated to the subscriber, or Hosts behind the subscriber, or Framed route
attribute (if downloaded from the AAA server). If the source IP address does not match, the packet is
dropped for the subscriber.
set of addresses that are allocated to the subscriber, or Hosts behind the subscriber, or Framed route
attribute (if downloaded from the AAA server). If the source IP address does not match, the packet is
dropped for the subscriber.
Examples
The following example enables the security subscriber address-filtering ingress command:
Router(config-gw-ug)#security subscriber address-filtering ingress
Release
Modification
12.4(15)XL
This command was introduced.