Cisco Cisco IOS Software Release 12.4(15)XR Technische Referenzen
23
OL-23065-01
Command Reference for Cisco PDSN Release 4.0 in IOS Release 12.4(15)XR
cdma pdsn a11 session-update
To enable the A11 Session update feature on the PDSN, and to send an A11 session update for either the
Always On, or RNPDIT (or both) attributes that are downloaded from the AAA during the authentication
phase, use the cdma pdsn a11 session-update command in global configuration. Use the no form of the
command to disable this feature.
Always On, or RNPDIT (or both) attributes that are downloaded from the AAA during the authentication
phase, use the cdma pdsn a11 session-update command in global configuration. Use the no form of the
command to disable this feature.
cdma pdsn a11 session-update {[always-on] 1-10 [rn-pdit] 0-9}
no cdma pdsn a11 session-update {[always-on] [rn-pdit] 1-10}
Syntax Description
Defaults
The default timeout value is 3 seconds. The default retransmit number is 3.
Command Modes
Global configuration
Command History
Examples
The following example enables both the always-on and rn-pdit attributes:
Router(config)#cdma pdsn a11 session-update ?
always-on Send Always-on indicator in A11 Session-Update
rn-pdit Send RN-PDIT in A11 Session-Update
Command
Description
always-on
Sends an A11 session update for the Always On attribute
that is downloaded from the AAA during the authentication
phase.
that is downloaded from the AAA during the authentication
phase.
rn-pdit
Sends an A11 session update for the RN-PDIT attribute
that is downloaded from the AAA during the authentication
phase.
that is downloaded from the AAA during the authentication
phase.
1-10
Sets the timeout value for re-transmission of the A11
session update message to the PCF. The default timeout
value is 3 seconds.
session update message to the PCF. The default timeout
value is 3 seconds.
0-9
Sets the retransmit limit for the A11 session update if A11
session update Ack is not received from the PCF. Default
re-transmission value is 3.
session update Ack is not received from the PCF. Default
re-transmission value is 3.
Release
Modification
12.3(11)YF
This command was introduced.