Cisco Cisco IOS Software Release 12.2(33)SRE
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2007 Cisco Systems, Inc. All rights reserved.
DHCP Server Multiple Subnet
The DHCP Server Multiple Subnet feature enables multiple disjoint subnets to be configured under the
same DHCP address pool. This functionality enables the DHCP server to manage additional IP addresses
by adding the addresses to the existing DHCP address pool (instead of using a separate address pool).
Multiple subnets in a DHCP address pool can occur along with or instead of managing individual client
addresses.
same DHCP address pool. This functionality enables the DHCP server to manage additional IP addresses
by adding the addresses to the existing DHCP address pool (instead of using a separate address pool).
Multiple subnets in a DHCP address pool can occur along with or instead of managing individual client
addresses.
See the
for information about which release trains support DHCP features.
Configuration Information
Configuration information is included in the “Configuring the Cisco IOS DHCP Server” module of the
, Release 12.4T,
at the following URL:
The following sections provide information about this feature:
•
Configuring a DHCP Address Pool
•
DHCP Address Pool Configuration with Multiple Disjoint Subnets: Example
For a complete list of features included in the “Configuring the Cisco IOS DHCP Server” module, see
the Feature Information Table located toward the end of the module.
the Feature Information Table located toward the end of the module.
Command Reference Information
Release 12.2(33)SRB
The following commands are new or modified for this feature:
•
network (DHCP)
•
override default-router
Detailed information about these commands is included in the
chapter of the
Cisco
IOS IP Addressing Services Command Reference
, Release 12.2SR, at the following URL:
•