Cisco Cisco IOS Software Release 12.2(35)SE
Americas Headquarters:
© 2010 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Release Notes for the Catalyst 2960-S Switches,
Cisco IOS Release 12.2(53)SE1
Cisco IOS Release 12.2(53)SE1
Updated April 9, 2010
Cisco IOS Release 12.2(53)SE1 runs on Catalyst 2960-S switches.
Some models of the switches support Cisco FlexStack and are stacking-capable. Unless otherwise noted,
the term switch refers to a standalone switch and to a switch stack.
the term switch refers to a standalone switch and to a switch stack.
These release notes include important information about Cisco IOS Release 12.2(53)SE1 and any
limitations, restrictions, and caveats that apply to the releases. Verify that these release notes are correct
for your switch:
limitations, restrictions, and caveats that apply to the releases. Verify that these release notes are correct
for your switch:
•
If you are installing a new switch, see the Cisco IOS release label on the rear panel of your switch.
•
If your switch is on, use the show version privileged EXEC command. See the
For the complete list of Catalyst 2960-S switch documentation, see the
You can download the switch software from this site (registered Cisco.com users with a login password):
Contents
•
•
•
•
•
•
•
•