Cisco Cisco IOS Software Release 12.2(27)SBC
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2007 Cisco Systems, Inc. All rights reserved.
QoS CLI Migration from PRE2 to PRE3
First Published: November, 2006
Revised: July, 2007
Revised: July, 2007
The Quality of Service (QoS) Command Line Interface (CLI) Migration from PRE2 to PRE3 feature
provides QoS CLI backward-compatibility between the PRE2 and PRE3, thereby enabling the PRE3 to
accept PRE2-style commands.
provides QoS CLI backward-compatibility between the PRE2 and PRE3, thereby enabling the PRE3 to
accept PRE2-style commands.
History for the QoS CLI Migration from PRE2 to PRE3 Feature
Finding Support Information for Platforms and Cisco IOS Software Images
Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image
support. Access Cisco Feature Navigator at
support. Access Cisco Feature Navigator at
. You must have an account on
Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at
the login dialog box and follow the instructions that appear.
the login dialog box and follow the instructions that appear.
Contents
•
•
•
•
•
•
Release
Modification
12.2(31)SB2
This feature was introduced and implemented on the Cisco 10000 series
router for the PRE3.
router for the PRE3.