Cisco Cisco IOS Software Release 12.2(25)SEC
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2004–2005, 2007 Cisco Systems, Inc. All rights reserved.
Area Command in Interface Mode for OSPFv2
First Published: August 09, 2004
Last Updated: February 19, 2007
Last Updated: February 19, 2007
This document describes how to enable Open Shortest Path First version 2 (OSPFv2) on a per-interface
basis to simplify the configuration of unnumbered interfaces. The ip ospf area command allows you to
enable OSPFv2 explicitly on an interface. The ip ospf area command is an alternative to enabling
OSPFv2 through the address of the interface that matches the address range specified by the network
area command.
basis to simplify the configuration of unnumbered interfaces. The ip ospf area command allows you to
enable OSPFv2 explicitly on an interface. The ip ospf area command is an alternative to enabling
OSPFv2 through the address of the interface that matches the address range specified by the network
area command.
Finding Feature Information in This Module
Your Cisco IOS software release may not support all of the features documented in this module. To reach
links to specific feature documentation in this module and to see a list of the releases in which each
feature is supported, use the
links to specific feature documentation in this module and to see a list of the releases in which each
feature is supported, use the
Finding Support Information for Platforms and Cisco IOS and Catalyst OS Software Images
Use Cisco Feature Navigator to find information about platform support and Cisco IOS and Catalyst OS
software image support. To access Cisco Feature Navigator, go to
software image support. To access Cisco Feature Navigator, go to
. An
account on Cisco.com is not required.
Contents
•
•
•
•
•
•
•
•