Cisco Cisco IOS Software Release 12.2(55)SE
Americas Headquarters:
© 2012 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Release Notes for Cisco Catalyst Blade
Switch 3120 for HP, Cisco IOS Release 12.2(55)SE
and Later
Switch 3120 for HP, Cisco IOS Release 12.2(55)SE
and Later
Revised March 28, 2012
Cisco IOS Release 12.2(55)SE runs on the Cisco Catalyst Blade Switch 3120 for HP switches. These
switches support stacking through Cisco StackWise Plus technology. Unless otherwise noted, the term
switch refers to a standalone switch and to a switch stack.
switches support stacking through Cisco StackWise Plus technology. Unless otherwise noted, the term
switch refers to a standalone switch and to a switch stack.
These release notes include important information about Cisco IOS Release 12.2(53)SE and later and
any limitations, restrictions, and caveats that apply to it. Verify that these release notes are correct for
your switch:
any limitations, restrictions, and caveats that apply to it. Verify that these release notes are correct for
your switch:
•
If you are installing a new switch, see the Cisco IOS release label on the rear panel of your switch.
•
If your switch is on, use the show version privileged EXEC command. See the
•
If you are upgrading to a new release, see the software upgrade filename for the software version.
See the
See the
You can download the switch software from this site (registered Cisco.com users with a login password):
http://www.cisco.com/cisco/web/download/index.html
For the complete list of the Cisco Catalyst Blade Switch 3120 for HP documentation, see the
Note
References in this document to the CBS3120G-S and CBS3120X-S switches also apply to the
CBS3125G-S and CBS3125X-S switches, respectively.
CBS3125G-S and CBS3125X-S switches, respectively.