Cisco Cisco IOS XE 3.5E Technisches Handbuch
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics before you attempt this configuration:
Cisco IOS
®
GUI or CLI with the Converged Access 5760 and 3650 Series WLCs and the Catalyst
3850 Series Switch
•
GUI and CLI access with the 5508 Series WLC
•
Service Set Identifier (SSID) configuration
•
Web authentication
•
Components Used
The information in this document is based on these software and hardware versions:
Cisco 5760 Release 3.3.3 (Next Generation Wiring Closet [NGWC])
•
Catalyst 3850 Series Switch
•
Cisco 5508 Series WLC Release 7.6.120
•
Cisco 3602 Series Lightweight APs
•
Cisco Catalyst 3560 Series Switches
•
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Configure
Note: Use the Command Lookup Tool (registered customers only) in order to obtain more information on the
commands used in this section.
commands used in this section.
Network Diagram
The 5508 Series WLC acts as an Anchor Controller, and the Catalyst 3850 Series Switch acts as a Foreign
Controller and the Mobility Agent that obtains the license from the Mobility Controller 5760.
Controller and the Mobility Agent that obtains the license from the Mobility Controller 5760.