Cisco Cisco IOS XE 3.5E Technisches Handbuch
CT5760 Controller and Catalyst 3850 Switch
Configuration Example
Configuration Example
Document ID: 116342
Contributed by Antoine KMEID and Serge Yasmine, Cisco TAC
Engineers.
Aug 13, 2013
Engineers.
Aug 13, 2013
Contents
Introduction
Prerequisites
Requirements
Components Used
Background Information for the Unified Access CT5760 Wireless Controller
Background Information for the Unified Access Catalyst 3850 Switches
5760 WLC Initial Configuration
Configure
Setup Script
Required Configuration for Access Points to Join
Verify
Troubleshoot
3850 Switch Initial Configuration
Configure
Setup Script
Required Configuration for Access Points to Join
Verify
Troubleshoot
Prerequisites
Requirements
Components Used
Background Information for the Unified Access CT5760 Wireless Controller
Background Information for the Unified Access Catalyst 3850 Switches
5760 WLC Initial Configuration
Configure
Setup Script
Required Configuration for Access Points to Join
Verify
Troubleshoot
3850 Switch Initial Configuration
Configure
Setup Script
Required Configuration for Access Points to Join
Verify
Troubleshoot
Introduction
This document describes the steps to install and prepare wireless services on the 5760 Wireless LAN
Controller (WLC) and 3850 switch. This document covers initial configuration and the Access Point (AP)
join process for both of the platforms.
Controller (WLC) and 3850 switch. This document covers initial configuration and the Access Point (AP)
join process for both of the platforms.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on these software and hardware versions:
Unified Access CT5760 Wireless Controller − Version 3.02.02SE
•
Unified Access Catalyst 3850 Switch − Version 3.02.02SE
•
The information in this document was created from the devices in a specific lab environment. All of the