Cisco Cisco IOS Software Release 15.0(1)SE
Americas Headquarters:
© 2013 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Release Notes for the Catalyst 2928 Switch,
Cisco IOS Release 15.0(2)SE and Later
Cisco IOS Release 15.0(2)SE and Later
November 10, 2016
Cisco IOS Release 15.0(2)SE and higher runs on the Catalyst 2928 switch. You can use the switch with
a third-party system that provides authentication, authorization, and accounting services to provide both
wired and wireless network access.
a third-party system that provides authentication, authorization, and accounting services to provide both
wired and wireless network access.
The Catalyst 2928 switches and the third-party system implement a stringed access control that binds a
user name and password with the IP address, MAC address, VLAN ID, and port number.
user name and password with the IP address, MAC address, VLAN ID, and port number.
These release notes include important information about Cisco IOS Release 15.0(2)SE and any
limitations, restrictions, and caveats that apply to this release. Verify that these release notes are correct
for your switch:
limitations, restrictions, and caveats that apply to this release. Verify that these release notes are correct
for your switch:
•
If you are installing a new switch, see the Cisco IOS release label on the rear panel of your switch.
•
If your switch is on, use the show version privileged EXEC command. See the
•
If you are upgrading to a new release, see the software upgrade filename for the software version.
See the
See the
You can download the switch software from this site (registered Cisco.com users with a login password):
Contents
•
•
•
•
•
•
•