Cisco Cisco IPS 4255 Sensor Technisches Handbuch

Introduction
 Prerequisites
      Requirements
      Components Used
      Related Products
      Conventions
 Background Information
 Configure
      Email Notification Configuration in IME
 Troubleshoot
 Related Information

This document explains the process of the configuration of the Cisco IPS Manager Express (IME) in order to
send the email notification message (alerts) when Event Rules are triggered by Cisco Intrusion Prevention
System (IPS) Sensors.

There are no specific prerequisites for this document.

The information in this document is based on these software and hardware versions:

Cisco 4200 Series IPS Device that runs software version 6.0 and later

• 

Cisco IPS Manager Express (IME) version 6.1.1 and later

Note: While IME can be used to monitor sensor devices that run Cisco IPS 5.0 and later, some of the
new features and functionality delivered in IME are only supported on sensors that run Cisco IPS 6.1
or later.

• 

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.

This configuration can also be used with these sensors:

IPS−4240

•