Cisco Cisco IPS 4520 Sensor Weißbuch

32

Firewall

August 2012 Series

32

Step 26:  

In the 

Metric

 box, enter 

254

, and then click 

OK

.

Step 27:  

On the Static Routes pane, click 

Apply

.

Next, you will add a host route for the tracked object via the Internet-CPE-1 
address. This assures that probes to the tracked object will always use the 
primary ISP connection.

Step 28:  

In 

Configuration > Device Setup > Routing > Static Routes

, click 

Add

.

Step 29:  

In the Add Static Route dialog box, in the 

Interface

 list, select 

the primary Internet connection interface created in Step 9. (Example: 
outside-16)

Step 30:  

In the 

Network

 box, enter the IP address used for tracking in the 

primary default route. (Example: 172.18.1.1/32)

Step 31:  

In the 

Gateway IP

 box, enter the primary Internet CPE’s IP 

address, and then click 

OK

. (Example: 172.16.130.126)

Step 32:  

On the Static Routes pane, click 

Apply

.

Step 33:  

In Cisco ASDM, refresh the configuration.

Step 34:  

You can monitor the reachability of the tracked object by navigat-

ing to 

Monitoring > Interfaces > Connection outside-16 > Track Status for

id-1

.