Cisco Cisco ASA 5510 Adaptive Security Appliance Merkblatt
10-27
Cisco ASA Series 명령 참조, S 명령
10장 show nac-policy through show ospf virtual-links 명령
show ospf interface
show ospf interface
OSPF 관련 인터페이스 정보를 표시하려면 특권 EXEC 모드에서 show ospf interface 명령을 사용
합니다.
합니다.
show ospf interface
[interface_name]
구문 설명
기본값
기본 동작 또는 값은 없습니다.
명령 모드
다음 표에서 명령을 입력할 수 있는 모드를 확인할 수 있습니다.
명령 기록
사용 지침
interface_name
인수 없이 사용하면 모든 인터페이스에 대한 OSPF 정보가 표시됩니다.
예
다음은 show ospf interface 명령의 샘플 출력입니다.
ciscoasa# show ospf interface outside
out is up, line protocol is up
Internet Address 10.0.3.4 mask 255.255.255.0, Area 0
Process ID 2, Router ID 10.0.3.4, Network Type BROADCAST, Cost: 10
Transmit Delay is 1 sec, State WAITING, Priority 1
No designated router on this network
No backup designated router on this network
Timer intervals configured, Hello 10 msec, Dead 1, Wait 1, Retransmit 5
Hello due in 5 msec
Wait time before Designated router selection 0:00:11
Index 1/1, flood queue length 0
Next 0x00000000(0)/0x00000000(0)
Last flood scan length is 0, maximum is 0
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 0, Adjacent neighbor count is 0
Suppress hello for 0 neighbor(s)
관련 명령
interface_name
(선택 사항) OSPF 관련 정보를 표시할 인터페이스의 이름입니다.
명령 모드
방화벽 모드
보안 상황
라우팅 모드 투명 모드
단일 모드
다중 모드
상황
상황
시스템
특권 EXEC
•
예
—
•
예
•
예
—
릴리스
수정 사항
7.0(1)
이 명령이 도입되었습니다.
9.0(1)
다중 상황 모드가 지원됩니다.
명령
설명
interface
인터페이스 컨피그레이션 모드를 시작합니다.