Cisco Cisco ASA 5540 Adaptive Security Appliance Fehlerbehebungsanleitung
ASA Reloads Without crashinfo File When Large
Files are Uploaded to Flash
Files are Uploaded to Flash
Document ID: 113422
Contributed by Justin Betz, Cisco TAC Engineer.
Jan 26, 2012
Jan 26, 2012
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Problem
Solution
Related Information
Prerequisites
Requirements
Components Used
Conventions
Problem
Solution
Related Information
Introduction
This document describes how to identify and resolve a problem that occurs when you copy files to the internal
flash memory of the ASA; the ASA reloads but does not generate a crashinfo file.
flash memory of the ASA; the ASA reloads but does not generate a crashinfo file.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on the Cisco Adaptive Security Appliance (ASA) 5520 or 5540.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Problem
When you copy a large file to the onboard flash of the ASA 5520 or the ASA 5540, the ASA might reboot
unexpectedly, and this information is displayed on the console:
unexpectedly, and this information is displayed on the console:
Killed
The system is going down NOW!
Sending SIGTERM to all processes
Sending SIGKILL to all processes
Requesting system reboot