Cisco Cisco ASA for Nexus 1000V Series Switch Fehlerbehebungsanleitung
ASA 8.x Anyconnect Authentication with the
Belgian eID Card
Belgian eID Card
Document ID: 98710
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Background Information
Local PC Setup
Operating System
Card Reader
eID Runtime Software
Authentication Certificate
AnyConnect Installation
ASA Requirements
ASA Configuration
Step 1. Enable the Outside Interface
Step 2. Configure the Domain Name, Password, and System Time
Step 3. Enable a DHCP Server on the Outside Interface.
Step 4. Configure the eID VPN Address Pool
Step 5. Import the Belgium Root CA Certificate
Step 6. Configure Secure Sockets Layer
Step 7. Define the Default Group Policy
Step 8. Define the Certificate Mapping
Step 9. Add a Local User
Step 10. Reboot the ASA
Fine Tune
One−Minute Configuration
Related Information
Prerequisites
Requirements
Components Used
Conventions
Background Information
Local PC Setup
Operating System
Card Reader
eID Runtime Software
Authentication Certificate
AnyConnect Installation
ASA Requirements
ASA Configuration
Step 1. Enable the Outside Interface
Step 2. Configure the Domain Name, Password, and System Time
Step 3. Enable a DHCP Server on the Outside Interface.
Step 4. Configure the eID VPN Address Pool
Step 5. Import the Belgium Root CA Certificate
Step 6. Configure Secure Sockets Layer
Step 7. Define the Default Group Policy
Step 8. Define the Certificate Mapping
Step 9. Add a Local User
Step 10. Reboot the ASA
Fine Tune
One−Minute Configuration
Related Information
Introduction
This document describes how to set up ASA 8.x Anyconnect authentication to use the Belgian eID card.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on these software and hardware versions:
ASA 5505 with the appropriate ASA 8.0 software
•
AnyConnect Client
•