Cisco Cisco 5508 Wireless Controller Technische Referenzen
Associating RLAN to Ethernet LAN ports on AP Group
Procedure
Step 1
Navigate to the AP Group and click on the AP Group created above.
Step 2
Go to the Ports/Module tab. To enable the LAN ports, select the Enable check box for the applicable LAN ports. If POE
has to be enabled on LAN1, select the POE check box. To associate RLAN to the LAN ports, select RLAN under the
RLAN drop down list for each of the LAN ports.
has to be enabled on LAN1, select the POE check box. To associate RLAN to the LAN ports, select RLAN under the
RLAN drop down list for each of the LAN ports.
Different RLANs can be applied to individual LAN ports.
Note
Step 3
Click Apply.
Over-riding AP Group Ethernet LAN Port Settings
One can configure Ethernet LAN ports settings on the AP group and these would apply to all the AIR-AP18101W Access Points.
To override this setting at individual AP level, follow the steps below:
To override this setting at individual AP level, follow the steps below:
Procedure
Step 1
On the WLC UI, Navigate to Wireless > Access Points > All APs. Select the AIR-AP1810W Access and go to the
Interfaces.
Interfaces.
Step 2
Click on the LAN Override check box. You can Enable/Disable LAN ports and POE for LAN1. Click on the Apply
button.
button.
18