Cisco Cisco 5508 Wireless Controller Designanleitung
1-33
Book Title
OL-xxxxx-xx
Chapter 1 Cisco Adaptive wIPS Management Deployment Guide, Release 8.0
Cisco Adaptive wIPS Introduction
Click Profile List on the left hand side.
Select Add Profile from the upper right-hand drop down menu.
Step 3
Select a profile template:
Cisco’s Adaptive wIPS system comes with a pre-defined set of profile templates of which customers
can use as a starting place to create their own custom profiles. Each one is tailored to a specific
vertical and varies in regards to which specific alarms are enabled.
can use as a starting place to create their own custom profiles. Each one is tailored to a specific
vertical and varies in regards to which specific alarms are enabled.
After selecting a profile and providing a name, click Save and Edit.
Step 4
Configure the SSIDs to Monitor (Optional):
By default, the system monitors attacks launched against the local Wireless LAN Infrastructure (as
defined by APs which have the same ‘RF Group’ name). If the system should also be required to
monitor attacks against another network, such as when deployed in an overlay deployment model,
the SSID groups feature must be utilized.
defined by APs which have the same ‘RF Group’ name). If the system should also be required to
monitor attacks against another network, such as when deployed in an overlay deployment model,
the SSID groups feature must be utilized.
If this step is not required, simply click Next.