Cisco Cisco Clean Access 3.5
6-8
Cisco Clean Access Server Installation and Administration Guide
OL-7045-01
Chapter 6 IPSec/L2TP/PPTP/PPP on the CAS
Configure PPTP Encryption
Configure PPTP Encryption
Like L2TP, the Point-to-Point Tunneling Protocol (PPTP), allows PPP frames to be tunneled through the
network. The actual data is encrypted using a session key and the initial session key is different per user.
The session key itself is changed periodically. If configuring PPTP, you must also
network. The actual data is encrypted using a session key and the initial session key is different per user.
The session key itself is changed periodically. If configuring PPTP, you must also
To set up PPTP:
1.
In the Network tab, click PPTP on the submenu to open the PPTP form.
Figure 6-7
PPTP
2.
Click the Enable option.
3.
In PPTP IP Pool, type the IP address range to use for the point-to-point connections. For
information on pool values, see
information on pool values, see
.
4.
Optionally, type appropriate DNS Server and WIN Server addresses for the pool clients.
5.
In the PPP form, enter the connection password (see
) and click Update.
6.
In the PPTP form, click the restart PPTP service button.