Cisco Cisco Aironet 1600i Access Point Technisches Handbuch
ip forward−protocol nd
ip http server
no ip http secure−server
ip http help−path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source−interface BVI1
!
!
radius−server attribute 32 include−in−access−req format %h
radius−server vsa send accounting
!
radius server WDS−Radius
address ipv4 10.106.54.146 auth−port 1812 acct−port 1813
key 7 110A1016141D5A5E57
!
bridge 1 route ip
!
!
wlccp ap username WDSClient1 password 7 070C285F4D06485744
wlccp ap wds ip address 10.106.54.146
!
line con 0
line vty 0 4
transport input all
!
end
Verify
Use this section to confirm that your configuration works properly. Once the setup is complete, the WDS
client AP should be able to register to the WDS AP.
client AP should be able to register to the WDS AP.
On the WDS AP, the WDS status is shown as Registered.
On the WDS Client AP, the WDS status is Infrastructure.