Cisco Cisco 521 Wireless Express Access Point Installationsanleitung
12
OL-16715-01
Deploying Controller-Based Access Points
In the controller-based architecture, you can deploy up to six controller-based
AP521s and configure them using the CCA. This procedure assumes that you
are using a UC500, a CE520, a WLC526, and the CCA.
AP521s and configure them using the CCA. This procedure assumes that you
are using a UC500, a CE520, a WLC526, and the CCA.
Refer to the Cisco Smart Business Communications System Setup document,
Section 4, ”Deploy Advanced Wireless,” and follow the steps listed there.
Section 4, ”Deploy Advanced Wireless,” and follow the steps listed there.
Note
Before you can deploy controller-based AP521s, you must first
configure the WLC526. See the Quick Start Guide: Cisco 526 Series
Wireless Express Mobility Controller for instructions.
configure the WLC526. See the Quick Start Guide: Cisco 526 Series
Wireless Express Mobility Controller for instructions.
Mounting the Access Point
The AP521 can be mounted as follows:
•
On a horizontal or vertical surface
•
On a suspended ceiling
•
Above a suspended ceiling
•
On a network cable box
•
On a desktop