Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch

Release Notes for 200, 300, 500, and ESW2 Series Switches Firmware Version 1.4.0

Release Notes

The following caveats are acknowledged in release 1.3.7.18:

Problem:

During SF500-24MP/48MP reset, the port GS4/S4 link is up for 5

seconds. (CSCum85751)

Solution:

None.

The following caveats are carried forward from release
1.3.5.58:

Problem:

Sometimes on the SG500XG-8F8T, the 10G copper port goes up and

down continuously if it is configured to a speed of 1G, and hence the Lion stack
performance have Losts of around 3% of frame loss. (CQ147378, CSCuj46317)

Solution:

Configure Nikola switch ports in 1G speed to Auto-negotiation

preferred master.

Problem:

When setting a new key chain for RIP using the WEB GUI, if it does not

include an accept-lifetime, it does not take effect, and only Key 1 takes effect with
accept-lifetime. (CQ148403, CSCuh54765)

Solution:

Use the CLI for entering the key chain, or enter both accept-lifetime and

send-lifetime. Only use Key 1 with accept-lifetime.

Problem:

WRR will lose efficacy after it is configured to egress shaping rate.

(CQ146677, CSCuf82588)

Solution:

Configure the WRR again.

Problem:

When user tries to Telnet some other devices from switch, it takes a

long time to logout. The user either needs to double click enter button or wait a long
time to logout from the device and return to the switch. (CQ146113, CSCuj46177)

Solution:

The only option is to either double click enter key or wait for a long time

to logout.

Problem:

On SG500XG-8F8T or SG500X, changing the stack mode from native

to advanced-hybrid-xg causes the start-up configuration to be lost. (CQ148932,
CSCui08988)

Solution:

Backup startup-config file before changing the stack mode.