Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
CSCF Service Configuration Mode Commands
▀ session-timer
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
session-timer
Configures the session expiry for sessions (Session will expire at the configured value unless refreshed.) and the
minimum number of seconds in a session timer (session-expires) value the system will allow.
minimum number of seconds in a session timer (session-expires) value the system will allow.
Product
SCM
Privilege
Administrator
Syntax
Default: 90
Specifies the minimum number of seconds the system will allow a session-expires value in a session request.
Specifies the minimum number of seconds the system will allow a session-expires value in a session request.
must be an integer value between 90 and the value of the
command.
Default: 1800 (30 minutes)
Specifies the number of seconds a session is allowed exist before it expires.
Specifies the number of seconds a session is allowed exist before it expires.
must be an integer value
between 90 and 18000.
Returns the command to the default settings.
Disables the session timer.
Usage
Use this command to set a session expiry value for all invites generated by the SCM and a minimum value for
a session request session timer the system will allow. If a session is requested with a timer of less than this
command‘s value, the system will reject the request with a ―422 Session Interval Too Small‖ response code.
a session request session timer the system will allow. If a session is requested with a timer of less than this
command‘s value, the system will reject the request with a ―422 Session Interval Too Small‖ response code.
Example
The following command sets the session expiry for all session generated by the SCM to 60 minutes:
The following command sets the session expiry for all session generated by the SCM to 60 minutes:
The following command sets the minimum session lifetime value for the service to
seconds: