Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Exec Modes Commands (D-S)
▀ disable
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
disable
Prevents the system from making requests of a selected RADIUS server.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Specifies the type of RADIUS server to disable.
Identifies the RADIUS server by IP address.
is specified using the standard IPv4 or IPv6 dotted decimal notation.
Default: 1812 (authentication) 1813 (accounting)
Specifies the port number of the RADIUS server being disabled.
Specifies the port number of the RADIUS server being disabled.
must be the configured port number of the RADIUS server being disabled and be 0 to 65535 numeric
characters in length.
Default: default
Specifies the RADIUS group to which the server belongs. Use this option in the event that the RADIUS
server belongs to multiple groups and you only want to disable the server within the specific group.
Specifies the RADIUS group to which the server belongs. Use this option in the event that the RADIUS
server belongs to multiple groups and you only want to disable the server within the specific group.
must be the name of a configured RADIUS Server group and be 1 to 63 characters in length.
Usage
Use this command to gracefully stop the system from making requests of a specific RADIUS server.
Example
The following command disables a RADIUS accounting server with an IP address of 1.2.3.4, the default accounting
server port number, and that resides in the ―Group5‖ server group:
The following command disables a RADIUS accounting server with an IP address of 1.2.3.4, the default accounting
server port number, and that resides in the ―Group5‖ server group: