Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Exec Mode Show Commands (A-C)
show boot ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
show boot
Displays information on the current boot image in use.
Product
All
Privilege
Security Administrator, Administrator, Operator, Inspector
Syntax
Identifies the OS image, configuration file, and boot priority used during the initial start up of the system.
Indicates the output of the command is to be piped (sent) to the command specified. A command to send
output to must be specified.
For details on the usage of
output to must be specified.
For details on the usage of
and
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter in the Command Line Interface Reference.
Usage
Show the boot information in preparing for maintenance activities by verifying current boot data. The boot
image in use may not be the same as the boot image stored on the SMC due to upgrades and pending reboots.
image in use may not be the same as the boot image stored on the SMC due to upgrades and pending reboots.
displays the actual boot image and configuration file loaded during boot.
This may or may not be the highest priority image and makes this command useful when comparing the
loaded image to the priority list.
loaded image to the priority list.
Important:
This command is not supported on all platforms.
Example
The following command displays the boot system configuration priority list:
The following command displays the boot system configuration priority list:
The following command displays the initial configuration after a system boot: