Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Exec Mode Show Commands (D-G)
show gtpu statistics ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
show gtpu statistics
Displays GPRS Tunneling Protocol user plane (GTP-U) statistics and counters on this system.
Product
P-GW, S-GW
Privilege
Inspector
Syntax
Displays configuration information for a specific GTP-U manager instance.
must be an existing instance and be an integer value from 1 to 4294967295.
Displays GTP-U statistics and counters for a specific GTP-U service configured on this system.
must be an existing GTP-U service, and be from 1 to 63 alpha and/or numeric characters in length.
Displays GTP-U statistics and counters for a specific peer IP address.
must be an existing peer IPv4 or IPv6 address and be specified in dotted decimal notation (for
IPv4) or colon-separated notation (for IPv6).
Indicates the output of the command is to be piped (sent) to the command specified.
A command to send output to must be specified.
For details on the usage of the
A command to send output to must be specified.
For details on the usage of the
and
commands, refer to the Regulating a Command‘s Output
section of Chapter 1 of the Command Line Interface Reference Guide.
Usage
Use this command to view statistics and counters for GTP-U traffic on this system.
Example
The following command displays statistics for the GTP-U service named
The following command displays statistics for the GTP-U service named
: