Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Exec Mode Show Commands (M-P)
show mme-hss service ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
show mme-hss service
Displays configuration and setup information of MME-HSS service(s) running on a peer or local system.
Product
MME
Privilege
Inspector
Syntax
Displays configuration/setup information for all MME-HSS services configured on this system.
Displays configuration/setup information for a specific MME-HSS service configured on this system.
must be an existing MME-HSS service, and be from 1 to 63 alpha and/or numeric
characters in length.
This keyword displays the comprehensive information of specific or set of arguments.
Indicates the output of the command is to be piped (sent) to the command specified.
A command to send output to must be specified.
For details on the usage of the
A command to send output to must be specified.
For details on the usage of the
and
commands, refer to the Regulating a Command‘s Output
section in CLI Overview chapter of the Command Line Interface Reference.
Usage
Use this command to view configuration/setup information for MME-HSS services on this system.
This command also displays the configured actions for failure handling on various type of messages.
This command also displays the configured actions for failure handling on various type of messages.
Example
The following command displays service statistics for all MME-HSS services configured on the esystem:
The following command displays service statistics for all MME-HSS services configured on the esystem:
Important:
Output descriptions for commands are available in the Statistics and Counters Reference.