Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
HNB-CS Network Configuration Mode Commands
▀ associate sccp-network
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
associate sccp-network
This command associates a predefined Signaling Connection Control Part (SCCP) network id with the CS network
instance in order to route the messages towards MSC/VLR over IuCS interface.
instance in order to route the messages towards MSC/VLR over IuCS interface.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Syntax
Removes the associated SCCP network id from this HNB-CS network instance configuration.
Identifies the predefined SCCP network id to associate with an HNB-CS network instance over IuCS/IuFlex
interface to enable connection with MSC/VLR(s).
The
interface to enable connection with MSC/VLR(s).
The
must be a predefined SCCP network id in Global configuration mode.
Usage
Use this command to associate a preconfigured SCCP network id over IuCS interface in HNB-GW service to
connect with CS network elements; i.e. MSC.
connect with CS network elements; i.e. MSC.
Caution:
The SCCP network id must be defined in Global Configuration mode before using it with this
command.
Important:
A single SCCP network configuration instance can not be shared with multiple HNB-CS network
instances.
Example
Following command associates SCCP network with specific HNB-CS network instance:
Following command associates SCCP network with specific HNB-CS network instance: