Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Active Charging Service Configuration Mode Commands
▀ fair-usage
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
fair-usage
This command enables Fair Usage feature configuration.
Product
ECS, CF, FW, NAT, P2P
Privilege
Security Administrator, Administrator
Syntax
Configures the default Fair Usage monitoring settings.
Default:
Default:
: 5 percent
: 50 percent
Specifies that Fair Usage monitoring must be disabled when the instance-level credit usage goes
percentage below
.
is a percentage value, and must be an integer from 1 through 100.
Specifies the threshold to start Fair Usage monitoring. Till the credit usage hits this threshold, all session
resource allocation is allowed. On crossing this threshold, any new resource allocation request is evaluated
and allowed or failed.
resource allocation is allowed. On crossing this threshold, any new resource allocation request is evaluated
and allowed or failed.
is a percentage value, and must be an integer from 1 through 100.
Usage
Use this command to enable the Fair Usage feature, which enables to perform SessMgr instance-level load
balancing for in-line service features, and resource usage control for subscribers. For information, refer to the
feature description in the Enhanced Charging Service Administration Guide.
balancing for in-line service features, and resource usage control for subscribers. For information, refer to the
feature description in the Enhanced Charging Service Administration Guide.
Example
The following command enables the Fair Usage feature, and configures the session resource usage threshold to start Fair
Usage monitoring to 75%:
The following command enables the Fair Usage feature, and configures the session resource usage threshold to start Fair
Usage monitoring to 75%:
The following command configures the deactivate margin to disable Fair Usage monitoring to 10% below the session
resource usage threshold (65%):
resource usage threshold (65%):