Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
IKEv2 Security Association Configuration Mode Commands
lifetime ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
lifetime
Configure the lifetime of a security association (SA) in seconds. Default timeout time is 86400 seconds
Product
PDIF
Privilege
Security Administrator, Administrator
Syntax
Default: 86400
Sets the value of the timeout parameter.
Sets the value of the timeout parameter.
must be an integer from 60 - 86400.
Usage
The secret keys that are used for various aspects of a configuration should only be used for a limited amount
of time before timing out. This exposes a limited amount of data to the possibility of hacking. If the SA
expires, the options are then to either close the SA and open an new one, or renew the existing SA.
of time before timing out. This exposes a limited amount of data to the possibility of hacking. If the SA
expires, the options are then to either close the SA and open an new one, or renew the existing SA.
Example
The following command sets the lifetime timeout to be the default value (86400):
The following command sets the lifetime timeout to be the default value (86400):