Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
IPMS Client Configuration Mode Commands
heartbeat ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
heartbeat
This command configures the IPMS heartbeating between IPMS-enabled AGW and IPMS server.
Product
IPMS
Privilege
Security Administrator, Administrator
Syntax
Configures the heartbeat period and permitted number of failure to default value of 10 seconds and 1 failure
respectively.
respectively.
Disables/removes the configured heartbeat period and permitted number of failure.
Default: 10
Specifies the periodicity in seconds of heartbeat messages.
Specifies the periodicity in seconds of heartbeat messages.
is the duration in second between two heartbeat messages and must be an integer value from 1 through
3600.
Default: 1
Specifies the number of errors/failures allowed before declaring an IPMS server as dead/unreachable.
Specifies the number of errors/failures allowed before declaring an IPMS server as dead/unreachable.
is the number of errors/failure of hearbeat message response and must be an integer
value from 1 through 10.
Usage
Use this command to configure the heartbeat message periodicity and permissible failure of heartbeat
message response before declaring an IPMS server as dead or unreachable. When an IPMS server is declared
down an SNMP trap is sent.
message response before declaring an IPMS server as dead or unreachable. When an IPMS server is declared
down an SNMP trap is sent.
Example
Following command configures the heartbeat message periodicity to second and number of failures allowed as to
determine an IPMS server as dead.
Following command configures the heartbeat message periodicity to second and number of failures allowed as to
determine an IPMS server as dead.