Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Active Charging Service Configuration Mode Commands
▀ firewall no-ruledef-matches
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
firewall no-ruledef-matches
This command configures the default action for packets when no firewall ruledef matches.
Important:
In StarOS 8.1 and later releases, this command is available in the Rulebase Configuration Mode.
Product
FW
Privilege
Security Administrator, Administrator
Syntax
Configures the default action for packets with no firewall ruledef match.
Default: uplink direction: permit, downlink direction: deny
Default: uplink direction: permit, downlink direction: deny
Specifies the packet type:
: Downlink packets with no firewall ruledef match.
: Uplink packets with no firewall ruledef match.
Specifies the default action for packets with no firewall ruledef match.
: Permit specified packets.
: Deny specified packets.
Optionally, a charging action can be specified.
must be the name of a charging action,
and must be a string of 1 through 63 characters in length.
Usage
Use this command to configure the default action to be taken on packets with no firewall ruledef matches.
If, for deny action, the optional charging action is configured, the action taken depends on what is configured
in the charging action. For the firewall rule, the ―flow action‖, ―billing action‖, and ―content ID‖ of the
charging action will be used to take action. If flow exists, flow statistics are updated.
If, for deny action, the optional charging action is configured, the action taken depends on what is configured
in the charging action. For the firewall rule, the ―flow action‖, ―billing action‖, and ―content ID‖ of the
charging action will be used to take action. If flow exists, flow statistics are updated.
Example
The following command sets Stateful Firewall to permit downlink packets with no ruledef matches:
The following command sets Stateful Firewall to permit downlink packets with no ruledef matches: