Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Linkset Configuration Mode Commands
▀ adjacent-point-code
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
adjacent-point-code
This command defines the point-code for the adjacent (next) network element in the SS7 network.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Point-code is an SS7 address for an element in the SS7 network. Point-codes must be defined in dotted-
decimal format in a string of 1 to 11 digits. Format options include
decimal format in a string of 1 to 11 digits. Format options include
0.0.1 to 7.255.7 for point-code in the ITU range.
0.0.1 to 255.255.255 for point-code in the ANSI range.
0.0.1 to 15.31.255 for point-code in the TTC Range.
a string of 1 to 11 digits in dotted-decimal to represent a point-code in a different range.
Removes the adjacent-point-code configuration for this linkset in the SS7 routing domain
Important:
Removing the linkset configuration will result in the termination of all of the links within the linkset.
Usage
Use this command to define the point-code for the adjacent element in the SS7 network.
Example