Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Linkset Configuration Mode Commands
link ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
link
This command creates an MTP3 link configuration for the SS7 linkset and enters the Link configuration mode.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Disables the specified link configuration.
Important:
Removing the link configuration will result in the termination of traffic on the specified link.
Sets the number of octets for the length of the LSSU.
This number uniquely identifies the link in the linkset.
an integer between 1 and 16.
Important:
This keyword is not yet functional - the feature is still in development.
This keyword is applicable only to releases 8.1 and higher.
Identifies the signalling type for this link; options include:
Identifies the signalling type for this link; options include:
atm-broadband
high speed-narrowband
low speed-narrowband
Usage
Access the Link configuration mode to make changes to the configuration for a link.
Example
Access configuration for link 4.
Access configuration for link 4.