Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
ALCAP Configuration Mode Commands
▀ maximum reset-retransmission
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
maximum reset-retransmission
This command sets the maximum number of retries allowed for transmission of RESET message to reset the AAL2
path.
path.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Syntax
Sets the number of RESET meesage retries to default value of 1.
Sets the maximum number of retries allowed for transmission of RESET message to reset the AAL2 path by
ALCAP service.
ALCAP service.
must be an integer value from 0 through 4. When 0 is used retransmission will be disabled.
Default: 1
Usage
Use this command to sets the maximum number of retries allowed for transmission of RESET message by
ALCAP service to reset the AAL2 path when Timer_RES expires. Once the maximum number of RESET
retries have been performed the ALCAP service shall stop the RESET procedure for the affected path and
path will become available for connections.
ALCAP service to reset the AAL2 path when Timer_RES expires. Once the maximum number of RESET
retries have been performed the ALCAP service shall stop the RESET procedure for the affected path and
path will become available for connections.
Example
The following command configures ALCAP service to send maximum number of RESET messages after expiry of
RESET timer for AAL2 path RESET procedure:
The following command configures ALCAP service to send maximum number of RESET messages after expiry of
RESET timer for AAL2 path RESET procedure: