Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
PVC Interface Configuration Mode Commands
ip ospf transmit-delay ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
ip ospf transmit-delay
This command configures the transmit-delay the OSPF communications parameters.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Deletes the value set and returns the value to its default.
The interval, in seconds, that the router should wait before transmitting a packet.
must be an integer from 1 through 65535. Default: 1
Usage
Use this command to set the transmit-delay.
Example
To set the transmit delay to 5 seconds, use the following command;
To set the transmit delay to 5 seconds, use the following command;
To delete the setting for the transmit-delay or reset the transmit-delay value to its default of 1, use the following
command‘
command‘