Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Route-map Configuration Mode Commands
set ip next-hop ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
set ip next-hop
Set the IP address that is applied as the next hop for routes.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Disable the specified next hop address.
This is the IP address of the next hop to which packets are output.
Usage
Use this command to set the IP address that is used as the next hop for routes.
Example
To set the next hop for routes to the IP address
To set the next hop for routes to the IP address
, use the following command:
set ip next-hop
To disable setting the next hop for routes to the IP address
, use the following command:
no set ip next-hop