Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
APN Configuration Mode Commands
data-tunnel mtu ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
data-tunnel mtu
Configures the Maximum Transmission Unit (MTU) for data sent on the IPv6 tunnel between the P-GW and the mobile
node.
node.
Product
P-GW
Privilege
Administrator
Syntax
Returns the command to the default value of 1500.
Default: 1500
Specifies the MTU for the IPv6 tunnel between the P-GW and the mobile node.
Specifies the MTU for the IPv6 tunnel between the P-GW and the mobile node.
must be an integer
between 1280 and 2000.
Usage
Use this command to set the MTU for data traffic on the IPv6 tunnel between the P-GW and the mobile node.
Example
The following command sets the MTU for IPv6 data traffic to
The following command sets the MTU for IPv6 data traffic to
bytes: