Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Rulebase Configuration Mode Commands
▀ egcdr time-duration algorithm
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
egcdr time-duration algorithm
This command is used to define the algorithm used to compute the duration for time utilization in eG-CDR for specific
Rulebase.
Rulebase.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Removes the previously configured eG-CDR time-duration algorithm.
Sets default time duration value to time duration algorithm for eG-CDR generation.
Default: 0 (disabled)
Defines the actual consumption time in seconds. This is used to determine the actual used chargeable time
envelopes for the purposes of consuming time quota.
Time envelope is the basis for reporting active usage. For each time envelope, the time consumption includes
the time duration between arrival of last packet and first packet only.
Defines the actual consumption time in seconds. This is used to determine the actual used chargeable time
envelopes for the purposes of consuming time quota.
Time envelope is the basis for reporting active usage. For each time envelope, the time consumption includes
the time duration between arrival of last packet and first packet only.
must be an integer from 1 through 4,294,967,295.
: Defines the idle time between arrival of two packets to include in time usage record in eG-
CDR.
When used along with
When used along with
it indicates the active usage + idle time, when no traffic flow
occurs.
Defines the continuous time period to compute the usage record in eG-CDR.
sets the audition in seconds to start a counter on arrival of first packet and there after include
only that period in charging in which one or more packets arrived. The period where no packets arrived or
traffic detected no usage will be computed.
traffic detected no usage will be computed.
must be an integer from 1 through 4294967295.
Defines the parking meter (PM) period in seconds.
Parking meter is the method with which the usage time is set in the content-id containers in eG-CDRs. When
a parking meter value is set, the user is charged for time in increments of the value set. For example; if the
parking meter value is set to 300 seconds (5 minutes) and the subscriber only uses one minute, the charge is
for 5 minutes.
Parking meter is the method with which the usage time is set in the content-id containers in eG-CDRs. When
a parking meter value is set, the user is charged for time in increments of the value set. For example; if the
parking meter value is set to 300 seconds (5 minutes) and the subscriber only uses one minute, the charge is
for 5 minutes.
must be an integer from 1 through 4294967295.