Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Rulebase Configuration Mode Commands
udr threshold ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
udr threshold
This command defines and enables the threshold limit to generate User Detail Records (UDRs) that provide Comma
Separated Value (CSV) records written periodically in a fixed schema designed to reflect a total billable quantity.
Separated Value (CSV) records written periodically in a fixed schema designed to reflect a total billable quantity.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Removes the previous configuration.
Sets the default configuration.
Default:
Default:
;
—disables the UDR
threshold settings.
Default: 0 (Disabled)
Specifies the time interval in seconds for closing the UDR if the minimum time duration thresholds are
satisfied. This option is disabled by default.
Specifies the time interval in seconds for closing the UDR if the minimum time duration thresholds are
satisfied. This option is disabled by default.
must be an integer from 60 through 40000000.
Specifies the uplink/downlink volume octet counts for the generation of the interim UDRs.
: Sets the limit for the number of octets downlink after which the UDR is closed.
(in bytes) must be an integer from 100,000 to 4,000,000,000. Default is 4,000,000,000.
: Sets the limit for the total number of octets (uplink+downlink) after which the UDR is
closed.
(in bytes) must be an integer from 100,000 to 4,000,000,000. By default, this
configuration is disabled.
: Sets the limit for the number of octets uplink after which the UDR is closed.
(
in bytes) must be an integer from 100,000 through 4,000,000,000. Default is 4,000,000,000.
UDR records are generated whenever either threshold is reached.
Usage