Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung

Seite von 5302
  APN Configuration Mode Commands 
dns  ▀   
Cisco ASR 5000 Series Command Line Interface Reference  ▄  
 
  OL-22948-01 
dns 
Configures the Domain Name Service (DNS) servers that will be used by the APN for PPP. 
Product
 
GGSN, P-GW 
Privilege
 
Security Administrator, Administrator 
Syntax
 
Deletes a previously configured DNS server. 
Configures the primary DNS server for the APN. 
Configures the secondary DNS server for the APN. Only one secondary DNS server can be configured. 
Default: primary = 0.0.0.0, secondary = 0.0.0.0 
Configures the IP address of the DNS server. 
 must be expressed in dotted decimal notation. 
Specifies the IP address of the DNS server to remove. 
 must be expressed in dotted decimal 
notation. 
Usage
 
DNS servers are configured on a per-APN profile basis. This allows each APN profile to use specific servers 
in processing PDP contexts. 
The configured DNS IP addresses are relayed to the subscriber within IPCP if the PDP type is PPP, or as 
PCOs (Protocol Configuration Options) if the PDP type is IP. 
The DNS can be specified at the APN level in APN configuration as well as at the Context level in Context 
configuration mode with 
 command, or it can be received from AAA server. 
When DNS is requested in PCO configuration, the following preference will be followed for DNS value: 
1. DNS Values received from LNS have the first preference. 
2. DNS values received from RADIUS Server has the second preference. 
3. DNS values locally configured with APN has the third preference. 
4. DNS values configured at context level with 
 command has the last preference.