Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
APN Configuration Mode Commands
▀ ip context-name
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
ip context-name
Configures the name of the destination context to use for subscribers accessing this APN.
Product
GGSN, P-GW
Privilege
Security Administrator, Administrator
Syntax
Removes a previously configured context name.
Specifies the name of the context through which subscriber data traffic will be routed.
must be from 1
to 79 alpha and/or numeric characters.
Usage
Use this command to specify the name of a destination context configured on the system through which to
route all subscriber data traffic. This context will be used for subscribers accessing this APN. If no name is
specified, the system will use the context in which the APN is configured as the destination context.
When the APN is used to support Mobile IP functionality, this command is used to indicate the context in
which the FA service is configured. If no name is specified, the context in which the GGSN service
facilitating the subscriber PDP context is used.
route all subscriber data traffic. This context will be used for subscribers accessing this APN. If no name is
specified, the system will use the context in which the APN is configured as the destination context.
When the APN is used to support Mobile IP functionality, this command is used to indicate the context in
which the FA service is configured. If no name is specified, the context in which the GGSN service
facilitating the subscriber PDP context is used.
Example
The following command configures the system to route subscriber traffic for the APN through a context called isp1:
The following command configures the system to route subscriber traffic for the APN through a context called isp1: