Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
SGSN Service Configuration Mode Commands
▀ network-sharing cs-ps-coordination
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
network-sharing cs-ps-coordination
Enables/disables the SGSN service to perform a CS-PS coordination check.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Including this keyword resets the SGSN service to allow the check to be performed.
Disables this feature for the SGSN service.
Usage
Use this command to facilitate the network sharing functionality. With this command, the SGSN can be
instructed to perform a check to determine if CS-PS coordination is needed.
3GPP TS 25.231 section 4.2.5 describes the functionality of the SGSN to handle CS-PS (circuit-
switching/packet-switching) coordination for attached networks not having a Gs-interface. In compliance
with the standard, the SGSN rejects an Attach in a MOCN configuration with cause 'CS-PS coordination
required', after learning the IMSI, to facilitate the RNC choosing the same operator for both CS and PS
domains.
instructed to perform a check to determine if CS-PS coordination is needed.
3GPP TS 25.231 section 4.2.5 describes the functionality of the SGSN to handle CS-PS (circuit-
switching/packet-switching) coordination for attached networks not having a Gs-interface. In compliance
with the standard, the SGSN rejects an Attach in a MOCN configuration with cause 'CS-PS coordination
required', after learning the IMSI, to facilitate the RNC choosing the same operator for both CS and PS
domains.
Example
Use the following syntax to disable the CS-PS coordination check:
Use the following syntax to disable the CS-PS coordination check: