Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Subscriber Configuration Mode Commands
▀ authorized-flow-profile-id
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
authorized-flow-profile-id
When a profile ID is requested by the Mobile Node (MN), this command sets the value that is authorized by the AGW.
Product
PDSN, ASN GW
Privilege
Security Administrator, Administrator
Syntax
Remove the existing profile ID setting specified by
.
must be an integer from 0
through 65535.
The profile ID number that is authorized for the current subscriber.
must be an integer from 0
through 65535.
This specifies in which data direction the profile ID should be applied.
bidirectional: This profile ID pertains to both the forward and reverse directions.
forward: This profile ID pertains to data going to the MN.
reverse: This profile ID pertains to data coming from the MN.
Usage
Use this command to set the profile ID that the AGW will authorize for a subscriber.
Example
Set the profile ID for both directions to 3 for the current subscriber by entering the following command
Set the profile ID for both directions to 3 for the current subscriber by entering the following command