Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Subscriber Configuration Mode Commands
▀ qos traffic-shape
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
qos traffic-shape
Enables and configures traffic shaping functionality to provide the traffic shaping by means of buffering the data
packets during congestion or when subscriber exceeds the configured peak or committed data rate limit. It buffers the
data packets instead of discarding instantaneous burst and deliver it to subscriber when traffic flow is below the peak or
committed data rate. Uplink and downlink traffic shaping are configured separately.
packets during congestion or when subscriber exceeds the configured peak or committed data rate limit. It buffers the
data packets instead of discarding instantaneous burst and deliver it to subscriber when traffic flow is below the peak or
committed data rate. Uplink and downlink traffic shaping are configured separately.
Important:
This feature is NOT supported for real-time traffic.
Product
PDSN, HA, GGSN, ASN GW
Privilege
Security Administrator, Administrator
Syntax
Apply the specified limits and actions to the downlink (data to the subscriber).
Apply the specified limits and actions to the uplink (data from the subscriber).
Default: 3000
The peak burst size allowed, in bytes.
The peak burst size allowed, in bytes.
must be an integer from 0 through 4294967295.
Important:
It is recommended that this parameter be configured to at least the greater of the following two
values: 1) 3 times greater than packet MTU for the subscriber connection, OR 2) 3 seconds worth of token accumulation
within the ―bucket‖ for the configured peak-data-rate.
within the ―bucket‖ for the configured peak-data-rate.
Default: 144000
The committed data rate (guaranteed-data-rate) in bps (bits per second).
The committed data rate (guaranteed-data-rate) in bps (bits per second).
must be an integer from 0 through 4294967295).
Default: lower-ip-precedence