Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
Subscriber Configuration Mode Commands
▀ timeout idle-time
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
timeout idle-time
This command configures the idle timeout configuration timer for subscriber session.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Default: 0
Designates the maximum duration of the session, in seconds, after the expiry of which the system disconnects
the subscriber.
Designates the maximum duration of the session, in seconds, after the expiry of which the system disconnects
the subscriber.
must be a value in the range from 0 through 4294967295.
The special value 0 disables the timeout specified.
Indicates the timeout specified is to be returned to its default behavior. If no specific timeout is specified then
all are set to their default behavior.
all are set to their default behavior.
Usage
Use this command to set the idle time after which the call has to be disconnected.
Example
Following command sets the idle timeout duration to 450 seconds.
Following command sets the idle timeout duration to 450 seconds.