Cisco Cisco Packet Data Gateway (PDG) Fehlerbehebungsanleitung
ASN Paging Controller Configuration Mode Commands
▀ paging-group
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
paging-group
This command creates/removes the Paging-Group Identifier within specific ASN paging controller service.
Product
ASN PC-LR
Privilege
Administrator
Syntax
Disables/removes the Paging Group identifier from specific ASN paging controller service.
Configures the Paging Group identifier to configure paging agent and other parameters within specific ASN
paging controller service.
This is a logical network identifier for the serving BS or other network entity retaining MS service and
operational information and/ or administering paging activity for the MS while in idle mode
paging controller service.
This is a logical network identifier for the serving BS or other network entity retaining MS service and
operational information and/ or administering paging activity for the MS while in idle mode
must be an integer from 1 through 65535.
Indicates that the command is to execute without any additional prompt and confirmation from the user.
W
ARNING
:
If this keyword option is used with
command the
will be deleted and disabled with all active/inactive configurations in a
paging group without prompting any warning or confirmation.
Usage
Use this command to enter/enable/disable Paging Group Identifier Configuration mode functionality within
specific ASN paging controller service.
specific ASN paging controller service.
Important:
A maximum of 32 paging groups can be configured within a service.
Example
The following command configures the paging group identifier as
The following command configures the paging group identifier as
for the ASN paging controller service: